Exposure to benzene,toluene, xylenes and total hydrocarbons among snowmobile drivers in Sweden

The exposure to benzene, toluene, xylenes and total hydrocarbons among 25 individuals exposed to exhaust from a snowmobile equipped with a two-stroke engine has been evaluated. Sampling was performed by pumped and diffusive sampling in parallel. There was a relatively bad agreement between the two air-sampling methods. The bad agreement can in part be explained by back diffusion of the substances from the samplers, a high face velocity, and deposition of droplets of unburned gasoline onto or in the vicinity of the samplers.

The levels of benzene ranged from not detectable (0.01 mg m⁻³) to 2.5 mg m⁻³. For toluene, xylenes and total hydrocarbons the exposure was 0.10–12.0, 0.05–13.0 and 0.90–273 mg m⁻³ respectively. The result from two measurements on individuals travelling on an open sleigh at the rear of the vehicle indicated higher levels of benzene, 0.7–0.8 mg m⁻³. Children are often riding as a passenger on a sledge and may thus have a higher exposure than their parents. This study indicates that spare time driving a snowmobile may cause a considerable exposure to benzene. Using a four-stroke engine equipped with a catalyst could reduce the exposure. To reduce the exposure for the passenger on a sleigh an extension of the exhaust pipe may be effective.     

废塑料裂解生产原料油的研究

本文对聚乙烯和聚丙烯的混合物裂解成原料油进行了研究 ,在 44 0℃条件下 ,不同比例的聚乙烯和聚丙烯被裂解。结果发现 ,聚丙烯有最高的液体回收率。几种催化剂被应用到聚丙烯的裂解过程中。裂解产品组分的构成及催化剂的选择是本研究的主要内容。通过比较几种不同催化剂的催化结果发现 ,复合催化剂有更好的催化效果。本研究为将来的废塑料综合利用提供了一种新的有用方法     

甲基叔丁基醚(MTBE)对环境的污染及其对我国汽油生产的影响

本文简要介绍了汽油添加剂MTBE对环境的污染及减少MTBE污染机理研究的进展 ,同时介绍了对我国汽油生产的影响     

废塑料催化裂解生成汽柴油中试工艺的研究

研究开发了一套废塑料催化裂解一次转化成汽、柴油的中试装置 ,可日产汽、柴油 2 t,能够实现进料、出油和排渣的连续化操作。裂解反应器具有传热效果好、生产能力大的特点。试验结果表明 :在催化剂加入量为 1%～ 3%、反应温度为 35 0～ 380℃条件下 ,汽油和柴油的总收率可达 70 %以上 ;由废聚乙烯、废聚丙烯和废聚苯乙烯炼制的汽油辛烷值分别为 72、77和 86 ,柴油的凝固点分别为 3℃、-11℃和 -2 2℃。该工艺操作安全 ,无“三废”排放。     

Emissions of intermediate volatility organic compound from waste cooking oil biodiesel and marine gas oil on a ship auxiliary engine

Ship auxiliary engines contribute large amounts of air pollutants when at berth.Biodiesel,including that from waste cooking oil(WCO),can favor a reduction in the emission of primary pollutant when used with internal combustion engines.This study investigated the emissions of gaseous intermediate-volatile organic compounds(IVOCs) between WCO biodiesel and marine gas oil(MGO) to further understand the differences in secondary organic aerosol(SOA) production of exhausts.Results revealed that WCO exhaust exhibited similar IVOC composition and volatility distribution to MGO exhaust,despite the differences between fuel contents.While WCO biodiesel could reduce IVOC emissions by 50% as compared to MGO,and thus reduced the SOA production from IVOCs.The compositions and volatility distributions of exhaust IVOCs varied to those of their fuels,implying that fuel-component-based SOA predicting model should be used with more cautions when assessing SOA production of WCO and MGO exhausts.WCO biodiesel is a cleaner fuel comparing to conventional MGO on ship auxiliary engines with regard to the reductions in gaseous IVOC emissions and corresponding SOA productions.Although the tests were conducted on test bench,the results could be considered as representative due to the widely applications of the test engine and MGO fuel on real-world ships.     

民用飞机油箱口盖抗低能量发动机碎片冲击适航验证技术研究

目的 依据适航条款CCAR25.963-e-1的要求,对民用飞机油箱口盖抗低能量发动机碎片冲击能力的适航符合性进行研究。方法 根据适航验证工作需要,制定了飞机油箱口盖抗低能量发动机碎片冲击的适航符合性验证流程,明确了适航取证需要考虑的油箱口盖范围和撞击角度,建立了发动机碎片有限元模型,开展了油箱口盖抗发动机碎片冲击的仿真分析与试验室试验。结果 仿真结果与试验结果对比分析后,二者基本一致,仿真分析基本能预测试验结果。结论 该仿真分析方法可供飞机口盖抗碎片冲击设计使用,该油箱口盖抗低能量碎片冲击适航符合性验证流程可供相似飞机适航取证参考使用。     

基于燃料特性的汽油机颗粒物排放预测关系式

汽油机的颗粒物排放与所用燃料的性能密切相关.为评价燃料特性对汽油机颗粒物排放的影响,建立了一个简化PN指数(SPNI)关系式并进行了统计学检验.该指数包含T70(70%蒸馏温度)、重芳烃(碳数≥9)含量、终馏点温度和烯烃含量4个关键的燃料参数.在试验和分析过程中配制了代表不同地区市场油的20种模型燃料,并对其燃料参数进行了相关性分析和多元线性回归.发动机试验结果表明,各种典型运行模式下的发动机实际颗粒物数量(PN)排放均与SPNI呈现高度的相关性.与已有的详细PM指数相比,该模型计算更为简便,可操作性强.该简化PN指数可用于工程上评价不同汽油燃料的颗粒物排放潜势.     

海洋平台主机烟气排放对直升机影响数值分析

目的确保南海A钻采平台直升机安全起降,直升机全年不可用概率控制在10%以内。方法通过Fluent软件数值模拟多工况、多风向风速下高温烟气在直升机甲板上方及周围空间的流动、温升及湍流分布规律,以CAP43-7标准所推荐直升机起飞和降落的安全原则为判定依据,分析计算温升和湍流对直升机起飞和降落的全年影响概率。结果综合得出直升机不可用概率理论值,M1工况为8%,M2工况为9%。结论模拟计算结果为平台主机烟管及直升机甲板布置方案的确定提供理论依据,为平台直升机起降操作起到指导作用。     

满足国六排放的缸内直喷汽油车污染物排放特性试验研究

以满足国六排放的某缸内直喷轻型汽油车为研究对象,试验研究了该车国六Ⅰ型测试循环(WLTC循环)排放的CO、THC、NOx和固态颗粒数量,以及包含挥发性/半挥发性组分的颗粒物数量和粒径分布特性.结果表明:WLTC循环工况覆盖范围广、车速高、加速度大的特点导致污染物排放增加;车辆冷机起动、暖机过程、瞬态过渡工况和高速大负荷工况对车辆的污染物排放影响较大,研发合理的车辆起动、催化剂起燃和暖机热管理策略、提高发动机瞬态过渡工况响应性是控制排放的重点;包含挥发性/半挥发性组分的颗粒物数量排放呈单峰分布,在15 nm附近达到峰值.     

燃气发动机瞬态工况下NOx排放特征

NO_x排放控制是发展燃气汽车的核心问题.为获得增压中冷燃气发动机瞬态工况NO_x的排放特征,实验选取了6MK375N-50增压中冷燃气发动机,研究了不同转速、转矩、进气流量、进气温度及湿度对NO_x排放的影响.试验结果表明NO_x的排放随着转速的增加先升高后减缓,转速为1400 r·min-1时NO_x排放最高,转矩的增加也会使NO_x排放增加,随着进气流量的增加,NO_x排放量先增加后稳定,进气流量为180 kg·h~(-1)时NO_x排放最高,进气温度对NO_x排放也有直接影响,进气温度为31℃时NO_x排放最高,随着进气湿度的增加,NO_x排放水平降低,对试验结果的双因素方差分析得到,各影响因素对NO_x的排放影响均非常显著.对1400 r·min-1下各个工况对应NO_x进行拟合,变化规律符合公式y=a-b×ln(x+c).